Debian/Ubuntu - [решено] Проблема с блютус

[Naiad]

Ммм... кстати, вспомнила, тоже была подобная проблема. Вы используете пароль для подключения? Мне помогло



Код:

Код: Выделить всё

echo -n "1234" >/etc/bluetooth/passkeys/default

где 1234 - пароль.

Правда я из консоли все делала.

[Alex.sys]

Naiad,
Цитата Naiad:



echo -n "1234" >/etc/bluetooth/passkeys/default

Debian/Ubuntu - [решено] Проблема с блютус

alex@alex-desktop:~$ tail -f /var/log/messages

Apr 23 22:38:37 alex-desktop pppd[5682]: pppd 2.4.4 started by root, uid 0

Apr 23 22:38:37 alex-desktop pppd[5682]: Using interface ppp0

Apr 23 22:38:37 alex-desktop pppd[5682]: Connect: ppp0 /dev/ttyACM0

Apr 23 22:38:40 alex-desktop pppd[5682]: PAP authentication succeeded

Apr 23 22:38:40 alex-desktop kernel: [ 76.938118] PPP BSD Compression module registered

Apr 23 22:38:40 alex-desktop kernel: [ 77.002509] PPP Deflate Compression module registered

Apr 23 22:38:41 alex-desktop pppd[5682]: local IP address 91.145.214.187

Apr 23 22:38:41 alex-desktop pppd[5682]: remote IP address 10.6.6.6

Apr 23 22:38:41 alex-desktop pppd[5682]: primary DNS address 212.58.160.33

Apr 23 22:38:41 alex-desktop pppd[5682]: secondary DNS address 212.58.160.34



и для чего это все?



z01,
Цитата z01:



#dmesg

Debian/Ubuntu - [решено] Проблема с блютус

[ 0.000000] 0: 0x00000100 -> 0x0003ffb0

[ 0.000000] On node 0 totalpages: 261967

[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000

[ 0.000000] DMA zone: 3963 pages, LIFO batch:0

[ 0.000000] Normal zone: 223300 pages, LIFO batch:31

[ 0.000000] HighMem zone: 32400 pages, LIFO batch:7

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)

[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs

[ 0.000000] mapped APIC to ffffb000 (fee00000)

[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000

[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfba0000)

[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data

[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259663

[ 0.000000] Kernel command line: root=UUID=3f2dae57-2043-4173-b879-f864cbe7c7c2 ro quiet splash

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.

[ 0.000000] TSC: using PMTIMER calibration value

[ 0.000000] Detected 2798.609 MHz processor.

[ 0.004000] Console: colour VGA+ 80x25

[ 0.004000] console [tty0] enabled

[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.004000] Memory: 1023720k/1048256k available (2572k kernel code, 23792k reserved, 1160k data, 424k init, 130752k highmem)

[ 0.004000] virtual kernel memory layout:

[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)

[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)

[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)

[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)

[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)

[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)

[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)

[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated

[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 5597.21 BogoMIPS (lpj=11194436)

[ 0.004042] Security Framework initialized

[ 0.004052] SELinux: Disabled at boot.

[ 0.004083] AppArmor: AppArmor initialized

[ 0.004098] Mount-cache hash table entries: 512

[ 0.004335] Initializing cgroup subsys ns

[ 0.004344] Initializing cgroup subsys cpuacct

[ 0.004347] Initializing cgroup subsys memory

[ 0.004373] CPU: Trace cache: 12K uops, L1 D cache: 16K

[ 0.004377] CPU: L2 cache: 256K

[ 0.004380] CPU: Hyper-Threading is disabled

[ 0.004385] using mwait in idle threads.

[ 0.004402] Checking 'hlt' instruction... OK.

[ 0.020669] SMP alternatives: switching to UP code

[ 0.030628] ACPI: Core revision 20080609

[ 0.033078] ACPI: Checking initramfs for custom DSDT

[ 0.408679] ENABLING IO-APIC IRQs

[ 0.408860] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.448555] CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 01

[ 0.452028] Brought up 1 CPUs

[ 0.452028] Total of 1 processors activated (5597.21 BogoMIPS).

[ 0.452028] CPU0 attaching sched-domain:

[ 0.452028] domain 0: span 0 level CPU

[ 0.452028] groups: 0

[ 0.452028] net_namespace: 840 bytes

[ 0.452028] Booting paravirtualized kernel on bare hardware

[ 0.452028] Time: 22:37:23 Date: 04/23/09

[ 0.452028] NET: Registered protocol family 16

[ 0.452028] EISA bus registered

[ 0.452028] ACPI: bus type pci registered

[ 0.452028] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2

[ 0.452028] PCI: Using configuration type 1 for base access

[ 0.452397] ACPI: EC: Look up EC in DSDT

[ 0.462836] ACPI: Interpreter enabled

[ 0.462842] ACPI: (supports S0 S1 S3 S4 S5)

[ 0.462868] ACPI: Using IOAPIC for interrupt routing

[ 0.476389] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.476542] PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff]

[ 0.476692] PCI: 0000:00:1d.0 reg 20 io port: [ef00, ef1f]

[ 0.476748] PCI: 0000:00:1d.1 reg 20 io port: [ef20, ef3f]

[ 0.476804] PCI: 0000:00:1d.2 reg 20 io port: [ef40, ef5f]

[ 0.476860] PCI: 0000:00:1d.3 reg 20 io port: [ef80, ef9f]

[ 0.476923] PCI: 0000:00:1d.7 reg 10 32bit mmio: [febffc00, febfffff]

[ 0.476979] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 0.476985] pci 0000:00:1d.7: PME# disabled

[ 0.477071] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000

[ 0.477078] pci 0000:00:1f.0: Enabled i801 SMBus device

[ 0.477086] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO

[ 0.477090] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO

[ 0.477117] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]

[ 0.477125] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]

[ 0.477133] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]

[ 0.477140] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]

[ 0.477148] PCI: 0000:00:1f.1 reg 20 io port: [fc00, fc0f]

[ 0.477155] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]

[ 0.477186] PCI: 0000:00:1f.2 reg 10 io port: [eff0, eff7]

[ 0.477193] PCI: 0000:00:1f.2 reg 14 io port: [efe4, efe7]

[ 0.477200] PCI: 0000:00:1f.2 reg 18 io port: [efa8, efaf]

[ 0.477207] PCI: 0000:00:1f.2 reg 1c io port: [efe0, efe3]

[ 0.477214] PCI: 0000:00:1f.2 reg 20 io port: [ef60, ef6f]

[ 0.477270] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]

[ 0.477316] PCI: 0000:00:1f.5 reg 10 io port: [e800, e8ff]

[ 0.477323] PCI: 0000:00:1f.5 reg 14 io port: [ee80, eebf]

[ 0.477331] PCI: 0000:00:1f.5 reg 18 32bit mmio: [febff800, febff9ff]

[ 0.477338] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [febff400, febff4ff]

[ 0.477368] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold

[ 0.477373] pci 0000:00:1f.5: PME# disabled

[ 0.477412] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]

[ 0.477419] PCI: 0000:01:00.0 reg 14 32bit mmio: [e8000000, efffffff]

[ 0.477441] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe9e0000, fe9fffff]

[ 0.477494] PCI: bridge 0000:00:01.0 32bit mmio: [fc900000, fe9fffff]

[ 0.477500] PCI: bridge 0000:00:01.0 32bit mmio pref: [e7f00000, f7efffff]

[ 0.477544] PCI: 0000:02:05.0 reg 10 io port: [d800, d8ff]

[ 0.477552] PCI: 0000:02:05.0 reg 14 32bit mmio: [feaffc00, feaffcff]

[ 0.477591] pci 0000:02:05.0: supports D1

[ 0.477594] pci 0000:02:05.0: supports D2

[ 0.477596] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold

[ 0.477601] pci 0000:02:05.0: PME# disabled

[ 0.477636] pci 0000:00:1e.0: transparent bridge

[ 0.477641] PCI: bridge 0000:00:1e.0 io port: [d000, dfff]

[ 0.477646] PCI: bridge 0000:00:1e.0 32bit mmio: [fea00000, feafffff]

[ 0.477665] bus 00 -> node 0

[ 0.477680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.477957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

[ 0.481612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[ 0.481793] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.481979] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.482158] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[ 0.482336] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.482514] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

[ 0.482694] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.482871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[ 0.483221] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - FD, should be EE [20080609]

[ 0.483235] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 0.483326] pnp: PnP ACPI init

[ 0.483343] ACPI: bus type pnp registered

[ 0.493431] pnp: PnP ACPI: found 15 devices

[ 0.493437] ACPI: ACPI bus type pnp unregistered

[ 0.493444] PnPBIOS: Disabled by ACPI PNP

[ 0.494207] PCI: Using ACPI for IRQ routing

[ 0.494400] NET: Registered protocol family 8

[ 0.494400] NET: Registered protocol family 20

[ 0.494400] NetLabel: Initializing

[ 0.494400] NetLabel: domain hash size = 128

[ 0.494400] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.494400] NetLabel: unlabeled traffic allowed by default

[ 0.494400] hpet clockevent registered

[ 0.494400] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.494400] hpet0: 3 64-bit timers, 14318180 Hz

[ 0.496321] tracer: 772 pages allocated for 65536 entries of 48 bytes

[ 0.496325] actual entries 65620

[ 0.496526] AppArmor: AppArmor Filesystem Enabled

[ 0.496555] ACPI: RTC can wake from S4

[ 0.496668] system 00:07: ioport range 0x680-0x6ff has been reserved

[ 0.496673] system 00:07: ioport range 0x290-0x297 has been reserved

[ 0.496682] system 00:08: ioport range 0x4d0-0x4d1 has been reserved

[ 0.496686] system 00:08: ioport range 0x800-0x87f has been reserved

[ 0.496689] system 00:08: ioport range 0x400-0x41f has been reserved

[ 0.496692] system 00:08: ioport range 0x480-0x4bf has been reserved

[ 0.496698] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved

[ 0.496702] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved

[ 0.496709] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved

[ 0.496713] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved

[ 0.496726] system 00:0e: iomem range 0x0-0x9ffff could not be reserved

[ 0.496730] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved

[ 0.496733] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved

[ 0.496736] system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved

[ 0.496740] system 00:0e: iomem range 0xfff00000-0xffffffff could not be reserved

[ 0.532355] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[ 0.532360] pci 0000:00:01.0: IO window: disabled

[ 0.532366] pci 0000:00:01.0: MEM window: 0xfc900000-0xfe9fffff

[ 0.532372] pci 0000:00:01.0: PREFETCH window: 0x000000e7f00000-0x000000f7efffff

[ 0.532381] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02

[ 0.532386] pci 0000:00:1e.0: IO window: 0xd000-0xdfff

[ 0.532393] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff

[ 0.532398] pci 0000:00:1e.0: PREFETCH window: disabled

[ 0.532422] pci 0000:00:1e.0: setting latency timer to 64

[ 0.532427] bus: 00 index 0 io port: [0, ffff]

[ 0.532430] bus: 00 index 1 mmio: [0, ffffffff]

[ 0.532432] bus: 01 index 0 mmio: [0, 0]

[ 0.532435] bus: 01 index 1 mmio: [fc900000, fe9fffff]

[ 0.532437] bus: 01 index 2 mmio: [e7f00000, f7efffff]

[ 0.532439] bus: 01 index 3 mmio: [0, 0]

[ 0.532442] bus: 02 index 0 io port: [d000, dfff]

[ 0.532444] bus: 02 index 1 mmio: [fea00000, feafffff]

[ 0.532447] bus: 02 index 2 mmio: [0, 0]

[ 0.532449] bus: 02 index 3 io port: [0, ffff]

[ 0.532451] bus: 02 index 4 mmio: [0, ffffffff]

[ 0.532470] NET: Registered protocol family 2

[ 0.532701] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.533129] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.534018] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.534496] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.534503] TCP reno registered

[ 0.534730] NET: Registered protocol family 1

[ 0.534918] checking if image is initramfs... it is

[ 0.996079] Switched to high resolution mode on CPU 0

[ 1.332660] Freeing initrd memory: 8771k freed

[ 1.334023] audit: initializing netlink socket (disabled)

[ 1.334045] type=2000 audit(1240526244.332:1): initialized

[ 1.339714] highmem bounce pool size: 64 pages

[ 1.339727] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 1.343604] VFS: Disk quotas dquot_6.5.1

[ 1.343774] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 1.343983] msgmni has been set to 1761

[ 1.344264] io scheduler noop registered

[ 1.344269] io scheduler anticipatory registered

[ 1.344271] io scheduler deadline registered

[ 1.344298] io scheduler cfq registered (default)

[ 1.344419] pci 0000:01:00.0: Boot video device

[ 1.345094] isapnp: Scanning for PnP cards...

[ 1.696872] isapnp: No Plug & Play device found

[ 1.809084] Serial: 8250/16550 driver4 ports, IRQ sharing enabled

[ 1.809270] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.809661] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 1.811363] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 1.812218] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.815885] brd: module loaded

[ 1.816048] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 1.816292] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[ 1.818391] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.818404] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 1.819495] mice: PS/2 mouse device common for all mice

[ 1.819910] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

[ 1.819940] rtc0: alarms up to one month, hpet irqs

[ 1.820229] EISA: Probing bus 0 at eisa.0

[ 1.820272] EISA: Detected 0 cards.

[ 1.820278] cpuidle: using governor ladder

[ 1.820280] cpuidle: using governor menu

[ 1.820999] TCP cubic registered

[ 1.821056] Using IPI No-Shortcut mode

[ 1.821818] registered taskstats version 1

[ 1.821951] Magic number: 5:631:654

[ 1.822104] rtc_cmos 00:02: setting system clock to 2009-04-23 22:37:25 UTC (1240526245)

[ 1.822109] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 1.822112] EDD information not available.

[ 1.822583] Freeing unused kernel memory: 424k freed

[ 1.822649] Write protecting the kernel text: 2576k

[ 1.822689] Write protecting the kernel read-only data: 936k

[ 1.841887] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 1.916576] compcache: Compressed swap size set to: 258320 KB

[ 1.917425] TLSF: pool: f881e000, init_size=16384, max_size=0, grow_size=16384

[ 2.083830] fuse init (API version 7.9)

[ 2.227175] processor ACPI0007:00: registered as cooling_device0

[ 2.253601] device-mapper: uevent: version 1.0.3

[ 2.254050] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [url=mailto:dm-devel@redhat.com]dm-devel@redhat.com[/url]

[ 3.121103] usbcore: registered new interface driver usbfs

[ 3.121143] usbcore: registered new interface driver hub

[ 3.121226] usbcore: registered new device driver usb

[ 3.124521] USB Universal Host Controller Interface driver v3.0

[ 3.128820] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 3.128835] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[ 3.128840] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 3.128916] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

[ 3.128953] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00

[ 3.129224] usb usb1: configuration #1 chosen from 1 choice

[ 3.129271] hub 1-0:1.0: USB hub found

[ 3.129285] hub 1-0:1.0: 2 ports detected

[ 3.169335] No dock devices found.

[ 3.227297] SCSI subsystem initialized

[ 3.232552] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 3.232567] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[ 3.232572] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 3.232620] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

[ 3.232657] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20

[ 3.232911] usb usb2: configuration #1 chosen from 1 choice

[ 3.232959] hub 2-0:1.0: USB hub found

[ 3.232972] hub 2-0:1.0: 2 ports detected

[ 3.238098] 8139too Fast Ethernet driver 0.9.28

[ 3.315613] libata version 3.00 loaded.

[ 3.396402] Adding 258316k swap on /dev/ramzswap0. Priority:100 extents:1 across:258316k

[ 3.440511] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 3.440526] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[ 3.440531] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 3.440579] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

[ 3.440618] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40

[ 3.440888] usb usb3: configuration #1 chosen from 1 choice

[ 3.440938] hub 3-0:1.0: USB hub found

[ 3.440953] hub 3-0:1.0: 2 ports detected

[ 3.552058] usb 2-1: new full speed USB device using uhci_hcd and address 2

[ 3.648525] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 3.648540] uhci_hcd 0000:00:1d.3: setting latency timer to 64

[ 3.648545] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[ 3.648595] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4

[ 3.648626] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80

[ 3.648893] usb usb4: configuration #1 chosen from 1 choice

[ 3.648948] hub 4-0:1.0: USB hub found

[ 3.648962] hub 4-0:1.0: 2 ports detected

[ 3.716970] usb 2-1: configuration #1 chosen from 1 choice

[ 3.752602] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23

[ 3.752625] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[ 3.752630] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 3.752682] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5

[ 3.756606] ehci_hcd 0000:00:1d.7: debug port 1

[ 3.756614] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported

[ 3.756635] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00

[ 3.763738] usb 2-1: can't set config #1, error -84

[ 3.772048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 3.772330] usb usb5: configuration #1 chosen from 1 choice

[ 3.772377] hub 5-0:1.0: USB hub found

[ 3.772392] hub 5-0:1.0: 8 ports detected

[ 3.892075] usb 2-1: USB disconnect, address 2

[ 3.983120] 8139too 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 3.984807] eth0: RealTek RTL8139 at 0xd800, 00:13:d4:65:7f:da, IRQ 22

[ 3.984812] eth0: Identified 8139 chip type 'RTL-8100B/8139D'

[ 3.989773] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

[ 3.994732] pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)

[ 3.994743] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 3.994791] pata_acpi 0000:00:1f.1: setting latency timer to 64

[ 3.994811] pata_acpi 0000:00:1f.1: PCI INT A disabled

[ 3.994835] pata_acpi 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 3.994861] pata_acpi 0000:00:1f.2: setting latency timer to 64

[ 3.994873] pata_acpi 0000:00:1f.2: PCI INT A disabled

[ 4.004118] ata_piix 0000:00:1f.1: version 2.12

[ 4.004137] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 4.004194] ata_piix 0000:00:1f.1: setting latency timer to 64

[ 4.005507] scsi0 : ata_piix

[ 4.005700] scsi1 : ata_piix

[ 4.007971] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14

[ 4.007976] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15

[ 4.172350] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-H552U, US06, max UDMA/33

[ 4.188308] ata1.01: configured for UDMA/33

[ 4.345103] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US06 PQ: 0 ANSI: 5

[ 4.345250] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 4.345256] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]

[ 4.345315] ata_piix 0000:00:1f.2: setting latency timer to 64

[ 4.350207] scsi2 : ata_piix

[ 4.350668] scsi3 : ata_piix

[ 4.350761] ata3: SATA max UDMA/133 cmd 0xeff0 ctl 0xefe4 bmdma 0xef60 irq 18

[ 4.350765] ata4: SATA max UDMA/133 cmd 0xefa8 ctl 0xefe0 bmdma 0xef68 irq 18

[ 4.484025] usb 2-1: new full speed USB device using uhci_hcd and address 3

[ 4.659261] usb 2-1: configuration #1 chosen from 1 choice

[ 4.698461] ata4.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133

[ 4.698466] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 4.712425] ata4.00: configured for UDMA/133

[ 4.712602] scsi 3:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5

[ 4.735346] scsi 0:0:1:0: Attached scsi generic sg0 type 5

[ 4.735492] scsi 3:0:0:0: Attached scsi generic sg1 type 0

[ 4.771862] Driver 'sr' needs updating - please use bus_type methods

[ 4.775491] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray

[ 4.775500] Uniform CD-ROM driver Revision: 3.20

[ 4.775649] sr 0:0:1:0: Attached scsi CD-ROM sr0

[ 4.824532] Driver 'sd' needs updating - please use bus_type methods

[ 4.824703] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

[ 4.824736] sd 3:0:0:0: [sda] Write Protect is off

[ 4.824740] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 4.824790] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 4.824914] sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

[ 4.824943] sd 3:0:0:0: [sda] Write Protect is off

[ 4.824948] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 4.824996] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 4.825004] sda: sda1 sda2 < sda5 sda6 sda7 >

[ 4.872992] sd 3:0:0:0: [sda] Attached SCSI disk

[ 4.952058] usb 3-2: new full speed USB device using uhci_hcd and address 2

[ 5.293411] PM: Starting manual resume from disk

[ 5.293418] PM: Resume from partition 8:7

[ 5.293421] PM: Checking hibernation image.

[ 5.293675] PM: Resume from disk failed.

[ 5.348933] kjournald starting. Commit interval 5 seconds

[ 5.348961] EXT3-fs: mounted filesystem with ordered data mode.

[ 10.777398] udevd version 124 started

[ 11.413861] Linux agpgart interface v0.103

[ 11.430160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 11.484247] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 11.532139] agpgart-intel 0000:00:00.0: Intel 865 Chipset

[ 11.536559] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000

[ 11.787250] intel_rng: FWH not detected

[ 11.844920] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[ 11.856596] ACPI: Power Button (FF) [PWRF]

[ 11.856792] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3

[ 11.872056] ACPI: Power Button (CM) [PWRB]

[ 11.928392] iTCO_vendor_support: vendor-support=0

[ 11.971274] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)

[ 11.971491] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)

[ 11.971748] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 12.707678] parport_pc 00:06: reported by Plug and Play ACPI

[ 12.707727] parport0: PC-style at 0x378, irq 7 [PCSPP]

[ 13.082934] nvidia: module license 'NVIDIA' taints kernel.

[ 13.983250] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 13.983700] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.18 Mon Mar 2 12:17:40 PST 2009

[ 14.494402] input: PC Speaker as /devices/platform/pcspkr/input/input4

[ 15.118226] usb 3-2: configuration #1 chosen from 1 choice

[ 15.122801] cdc_acm 2-1:1.1: ttyACM0: USB ACM device

[ 15.126128] usbcore: registered new interface driver cdc_ether

[ 15.126239] usbcore: registered new interface driver cdc_acm

[ 15.126274] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters

[ 15.161653] usb 2-1: bad CDC descriptors

[ 15.161704] usbcore: registered new interface driver rndis_host

[ 15.335284] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5

[ 15.448252] usb 2-1: bad CDC descriptors

[ 15.448315] usbcore: registered new interface driver rndis_wlan

[ 15.525639] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 15.525671] Intel ICH 0000:00:1f.5: setting latency timer to 64

[ 15.952037] intel8x0_measure_ac97_clock: measured 55856 usecs

[ 15.952042] intel8x0: clocking to 48000

[ 17.681608] Bluetooth: Core ver 2.13

[ 17.682782] NET: Registered protocol family 31

[ 17.682786] Bluetooth: HCI device and connection manager initialized

[ 17.682791] Bluetooth: HCI socket layer initialized

[ 17.713138] Bluetooth: Generic Bluetooth USB driver ver 0.3

[ 17.713333] usbcore: registered new interface driver btusb

[ 18.716155] lp0: using parport0 (interrupt-driven).

[ 18.970138] Adding 2425772k swap on /dev/sda7. Priority:-1 extents:1 across:2425772k

[ 19.554964] EXT3 FS on sda6, internal journal

[ 20.567943] kjournald starting. Commit interval 5 seconds

[ 20.568282] EXT3 FS on sda5, internal journal

[ 20.568292] EXT3-fs: mounted filesystem with ordered data mode.

[ 20.907085] type=1505 audit(1240515464.336:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4093

[ 21.128264] type=1505 audit(1240515464.560:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4098

[ 21.128627] type=1505 audit(1240515464.560:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4098

[ 21.293297] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 22.130051] ACPI: WMI: Mapper loaded

[ 23.538030] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)

[ 23.624612] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

[ 23.624623] apm: overridden by ACPI.

[ 23.888819] ppdev: user-space parallel port driver

[ 25.226880] vboxdrv: Trying to deactivate the NMI watchdog permanently...

[ 25.226894] vboxdrv: Successfully done.

[ 25.226897] vboxdrv: Found 1 processor cores.

[ 25.229501] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[ 25.229521] vboxdrv: Successfully loaded version 2.1.4 (interface 0x000a0009).

[ 27.309730] Bluetooth: L2CAP ver 2.11

[ 27.309742] Bluetooth: L2CAP socket layer initialized

[ 27.333829] Bluetooth: SCO (Voice Link) ver 0.6

[ 27.333839] Bluetooth: SCO socket layer initialized

[ 27.360881] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 27.360891] Bluetooth: BNEP filters: protocol multicast

[ 27.399908] Bridge firewalling registered

[ 27.401256] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.

[ 27.476814] Bluetooth: RFCOMM socket layer initialized

[ 27.477199] Bluetooth: RFCOMM TTY layer initialized

[ 27.477210] Bluetooth: RFCOMM ver 1.10

[ 30.353658] agpgart-intel 0000:00:00.0: AGP 3.0 bridge

[ 30.353680] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode

[ 30.353723] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode

[ 31.692757] eth0: link down

[ 40.301060] NET: Registered protocol family 10

[ 40.302957] lo: Disabled Privacy Extensions

[ 40.304977] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 74.138049] PPP generic driver version 2.4.2

[ 76.938118] PPP BSD Compression module registered

[ 77.002509] PPP Deflate Compression module registered

[ 137.006138] ppdev0: registered pardevice

[ 137.056056] ppdev0: unregistered pardevice

[ 137.256764] ppdev0: registered pardevice

[ 137.300192] ppdev0: unregistered pardevice

[ 139.676803] ppdev0: registered pardevice

[ 139.724326] ppdev0: unregistered pardevice

root@alex-desktop:/home/alex#

[z01]

Цитата Alex.sys:



[ 137.006138] ppdev0: registered pardevice

[ 137.056056] ppdev0: unregistered pardevice

[ 137.256764] ppdev0: registered pardevice

[ 137.300192] ppdev0: unregistered pardevice

[ 139.676803] ppdev0: registered pardevice

[ 139.724326] ppdev0: unregistered pardevice

Debian/Ubuntu - [решено] Проблема с блютус

вот это мне не нравица



пинкод какой нить вводите?



телефон с другими устройстваи по блютус нормально работает?




Цитата Alex.sys:



27.399908] Bridge firewalling registered

Debian/Ubuntu - [решено] Проблема с блютус

файрвол настроен нормально? возможно он не пускает

[Alex.sys]

Спасибо все за внимание. Проблему решил переустановкой дистрибутива. - Сменил Ubuntu 8.10 на 9.04