Вопросы после установки(настройка модема, загрузчик, иксы)

[Igor_I]

Прописываю параметры в /etc/ppp/ppp.conf




Цитата:



Цитата:В логах тоже ничего не понимаю, только вижу есть соединение или нет.



Каким образом?



Смотрю, есть ответ от роутера или нет.




Цитата:



Jul 18 18:53:05 igorserver ppp[417]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "GWH")

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: Received NGM_PPPOE_SESSIONID

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: Received NGM_PPPOE_SUCCESS

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: deflink: carrier -> login

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: deflink: login -> lcp

Jul 18 18:53:06 igorserver ppp[417]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: bundle: Authenticate

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: deflink: his = CHAP 0x05, mine = none

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: Chap Input: CHALLENGE (16 bytes)

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: Chap Output: RESPONSE (0000000)

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: Chap Input: SUCCESS (Welcome to use Quidway ROUTER, Huawei Tech.) - ответ от роутера

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: deflink: lcp -> open

Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: bundle: Network

[mrcnn]

Цитата:



Jul 18 18:53:06 igorserver ppp[417]: tun0: Phase: deflink: login -> lcp



А если после этого появляется злобная надпись "Disconnected" , что тогда делать? Чем она может быть вызвана?

[Igor_I]

Цитата mrcnn:



А если после этого появляется злобная надпись "Disconnected" , что тогда делать?

Вопросы после установки(настройка модема, загрузчик, иксы)

Не знаю.





Поставил расширенные опции лога.



set log Phase Chat LCP IPCP CCP tun command




Цитата:



Jul 23 20:07:06 igorserver ppp[417]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "GWH")

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: Received NGM_PPPOE_SESSIONID

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: Received NGM_PPPOE_SUCCESS

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: deflink: carrier -> login

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: deflink: login -> lcp

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: FSM: Using "deflink" as a transport

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: State change Initial --> Closed

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: State change Closed --> Stopped

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: RecvConfigReq(0) state = Stopped

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MRU[4] 1492

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MAGICNUM[6] 0xc9b316b3

Jul 23 20:07:07 igorserver ppp[417]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: ACFCOMP[2]

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: PROTOCOMP[2]

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: ACCMAP[6] 0x00000000

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MRU[4] 1492

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MAGICNUM[6] 0xa31de169

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: SendConfigAck(0) state = Stopped

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MRU[4] 1492

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MAGICNUM[6] 0xc9b316b3

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: LayerStart

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: State change Stopped --> Ack-Sent

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: RecvConfigRej(1) state = Ack-Sent

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: ACCMAP[6] 0x00000000

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: SendConfigReq(2) state = Ack-Sent

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: ACFCOMP[2]

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: PROTOCOMP[2]

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MRU[4] 1492

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MAGICNUM[6] 0xa31de169

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: RecvConfigAck(2) state = Ack-Sent

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: ACFCOMP[2]

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: PROTOCOMP[2]

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MRU[4] 1492

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: MAGICNUM[6] 0xa31de169

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: State change Ack-Sent --> Opened

Jul 23 20:07:07 igorserver ppp[417]: tun0: LCP: deflink: LayerUp

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: bundle: Authenticate

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: deflink: his = CHAP 0x05, mine = none

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: Chap Input: CHALLENGE (16 bytes)

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: Chap Output: RESPONSE (0000000)

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: Chap Input: SUCCESS (Welcome to use Quidway ROUTER, Huawei Tech.^M )

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: FSM: Using "deflink" as a transport

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: deflink: State change Initial --> Closed

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: deflink: LayerStart.

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: MPPE: Not usable without CHAP81

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: deflink: SendConfigReq(1) state = Closed

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: DEFLATE[4] win 15

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: PRED1[2]

Jul 23 20:07:07 igorserver ppp[417]: tun0: CCP: deflink: State change Closed --> Req-Sent

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: deflink: lcp -> open

Jul 23 20:07:07 igorserver ppp[417]: tun0: Phase: bundle: Network

Jul 23 20:07:07 igorserver ppp[417]: tun0: IPCP: FSM: Using "deflink" as a transport

Jul 23 20:07:07 igorserver ppp[417]: tun0: IPCP: deflink: State change Initial --> Closed

Jul 23 20:07:07 igorserver ppp[417]: tun0: IPCP: deflink: LayerStart.

Jul 23 20:07:07 igorserver ppp[417]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed

[mrcnn]

как файл в винду из фри засунуть не знаю (надо USB флэшку прикручивать, а я даже модем прикрутить не могу), переписывал из тетради, поэтому могут быть неточности (например, маленькие буквы вместо больших, или наоборот, отсутствие тире и т.п.



Phase: using interface: tun0

Phase: deflink: Created in closed state

tun0: command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255

tun0: command: adsl: set authname имя

tun0: command: adsl: set authkey код

tun0: command: adsl: set device ***

tun0: command: adsl: accept chap

tun0: command: adsl: speed sync

tun0: command: adsl: timeout 0

tun0: command: adsl: redial 15 10000

tun0: command: adsl: set dial

tun0: command: adsl: add default HISADDR

tun0: command: adsl: enable dns

tun0: Phase: PPP started (ddial mode)

tun0: Phase: bundle:Establish

tun0: Phase: deflink: closed->opening

tun0: Phase: deflink: Connected!

tun0: Phase: deflink: opening->dial

tun0: Phase: deflink: dial->carrier

tun0: Phase: deflink:carrier->login

tun0: Phase: deflink:login->lcp

tun0: LCP: deflink: State change: Initial->Closed

tun0: LCP: deflink: State change: Closed->Stopped

tun0: LCP: deflink: LayerStart

tun0: LCP: deflink: SentConfigReq(1)state=stopped

tun0: LCP: MRU[4] 1500

tun0: LCP: MAGICNUM [6] 0x00a49497

tun0: LCP: deflink: State change: Stopped->Req-sent

tun0: LCP: deflink: Send configreq(1) State: Req-sent

tun0: LCP: MRU[4] 1500

tun0: LCP: MAGICNUM [6] 0x00a49497

tun0: LCP: deflink: Send configreq(1) State: Req-sent

tun0: LCP: MRU[4] 1500

tun0: LCP: MAGICNUM [6] 0x00a49497

tun0: LCP: deflink: Send configreq(1) State: Req-sent

tun0: LCP: MRU[4] 1500

tun0: LCP: MAGICNUM [6] 0x00a49497

tun0: LCP: deflink: Send configreq(1) State: Req-sent

tun0: LCP: MRU[4] 1500

tun0: LCP: MAGICNUM [6] 0x00a49497

tun0: LCP: deflink: Send configreq(1) State: Req-sent

tun0: LCP: deflink: LayerFinish

tun0: LCP: deflink: State change: Req-sent->Stopped

tun0: LCP: deflink: State change: Stopped->Closed

tun0: LCP: deflink: State change: Closed->Initial

tun0: Phase: deflink: Disconnected

tun0: Phase: deflink: lcp->logout

tun0: Phase: deflink: logout->hangup

tun0: Phase: deflink: Connect time: 16 secs. 0 octets in, 90 octets out

tun0: Phase: deflink: total 5 bytes/sec, peak 7 bytes/sec on

tun0: Phase: deflink: HUPing 688

tun0: Phase: deflink: hangup->opening



повтор цикла





В чем проблема?

[mrcnn]

Кажется, понял, почему не коннектится. Нужно настроить соединение, используя RFC2516, а eciadsl использует RFC2364 и RFC1483.



разработчики драйверов пишут




Цитата:



================================================================================

Q: My provider use PPPoE (RFC1483, RFC2516), how can I manage to configure

this?



--------------------------------------------------------------------------------

A: First, don't use kernel's PPPoE support. It's experimental in 2.4 kernels

and used by default in Debian kernel. Use rp-pppoe instead as a userland

tool to manage the PPP connection. See 5.3.1 and 5.4.



Of course, the PPP mode defined in the ECIADSL config must be one of the

supported PPPoE modes (see `eciadsl-pppoeci --list`).



You can find rp-pppoe here:

http://www.roaringpenguin.com/pppoe

Install and configure it so that it uses tap0 as ETH interface.



Run eciadsl-start, then use rp-pppoe to enable the PPP line (see rp-pppoe

documentation).



rp-pppoe в freebsd не компилится. я в позапрошлое воскресенье пробовал и не получилось.

что можно использовать вместо пакета rp-pppoe?



Проблема сводится к поиску средства, с помощью которого можно настроить соединение с использованием RFC2516, но при этом работа с модемом идет с помощью драйвера eciadsl

[Igor_I]

Цитата mrcnn:



надо USB флэшку прикручивать

Вопросы после установки(настройка модема, загрузчик, иксы)

http://www.bsdportal.ru/viewtopic.ph...ighlight=flash

http://www.bsdportal.ru/viewtopic.ph...ighlight=flash