Windows - Проблема с Тачскрином

[Zerousiz]

Доброго времени суток! Столкнулась с проблемой неработающего тачскрина после перехода с 8.1 на windows 10 на планшете Qumo vega 8009w. Все драйвера обновила... Зашла на официальный сайт фирмы, где в разделе данной модели была сноска на архив драйвера тачскрина с упоминанием: что после перехода на десятку он может понадобиться. В этом архиве была невнятная инструкция:

[Version]

Signature = "$WINDOWS NT$"

Class = HIDClass

ClassGuid = {745a17a0-74d3-11d0-b6fe-00a0c90f57da}

Provider = %VENDOR%

LayoutFile = layout.inf

DriverVer=07/07/2015,15.52.48.989

CatalogFile = SileadTouch.cat



;

; Layout.inf (etc.) list all files shipped with the operating system so the

; source description sections are only needed if other files are needed.

;

; In order to use IHV drivers, the SourceDisksNames section must list the

; disk(s) containing the drivers and the SourceDisksFiles section must list

; which disk number each file to be copied is found on.

; Disk number 99 is used to avoid a conflict with the disk numbers defined

; in layout.inf

;

; Files used in a driver installation need to be digitally signed otherwise

; installation may fail. See documentation elsewhere in the DDK regarding

; driver signing.



[SourceDisksFiles]

SileadTouch.sys = 99



[SourceDisksNames]

99 = %DISK_NAME%,,,""



[DestinationDirs]

CopyFunctionDriver = 12

CopyFilterDriver = 12

;CopyTouchFirmware = 12



[Manufacturer]

%VENDOR%=Vendor, NTx86



[Vendor.NTx86]

%SileadTouch% = SileadTouch.Inst, ACPI\MSSL1680



;[OEMProjectInfo]

;project = hampoo HB080 3676



;===============================================================

; Install section for windows 10

;===============================================================

[SileadTouch.Inst.NT]

; Just copy the driver. No neeed to copy other system binaries.

;CopyFiles = CopyFilterDriver, CopyTouchFirmware

CopyFiles = CopyFilterDriver



[SileadTouch.Inst.NT.HW]

AddReg = SileadTouch_Parameters.AddReg, SileadTouch_Device.Configuration.AddReg



;

; mshidkmdf is the function driver and SileadTouch is the lower filter

;

[SileadTouch.Inst.NT.Services]

AddService = SileadTouch, 0x00000002, SileadTouch_Service_Inst

;AddService = SileadTouch,, SileadTouch_Service_Inst

;AddService = mshidkmdf, 0x000001fa, mshidkmdf.AddService ;flag 0x2 sets this as the service for the device



[CopyFilterDriver]

SileadTouch.sys



;[CopyTouchFirmware]

;SileadTouch.fw



[SileadTouch_Parameters.AddReg]

;HKR,,"LowerFilters",0x00010000,"SileadTouch"

HKR,,"UpperFilters",0x00010000,"mshidkmdf"



[SileadTouch_Device.Configuration.AddReg]

HKR,,"EnhancedPowerManagementEnabled",0x00010001,1



;[mshidkmdf.AddService]

;ServiceType = 1 ; SERVICE_KERNEL_DRIVER

;StartType = 3 ; SERVICE_DEMAND_START

;ErrorControl = 1 ; SERVICE_ERROR_NORMAL

;ServiceBinary = %10%\System32\Drivers\mshidkmdf.sys





;===============================================================

; Service section (common to all OS versions)

;===============================================================



[SileadTouch_Service_Inst]

DisplayName = %SileadTouch%

ServiceType = %SERVICE_KERNEL_DRIVER%

StartType = %SERVICE_DEMAND_START%

ErrorControl = %SERVICE_ERROR_IGNORE%

ServiceBinary = %12%\SileadTouch.sys



;================================================================

; Strings section

;===============================================================



[Strings]

;Localizable

VENDOR = "Sileadinc.com"

SileadTouch = "KMDF HID Minidriver for Touch I2C Device"

DISK_NAME = "HID I2C Touch Device Sample Install Disk"



;Non-Localizable

SERVICE_BOOT_START = 0x0

SERVICE_SYSTEM_START = 0x1

SERVICE_AUTO_START = 0x2

SERVICE_DEMAND_START = 0x3

SERVICE_DISABLED = 0x4



SERVICE_KERNEL_DRIVER = 0x1

SERVICE_ERROR_IGNORE = 0x0

SERVICE_ERROR_NORMAL = 0x1

SERVICE_ERROR_SEVERE = 0x2

SERVICE_ERROR_CRITICAL = 0x3



REG_EXPAND_SZ = 0x00020000

REG_DWORD = 0x00010001

REG_MULTI_SZ = 0x00010000

REG_BINARY = 0x00000001

REG_SZ = 0x00000000





И еще 3 файла: Каталог безопасности (.cat), Системный файл (.sys), Расширение приложения (.dll). Скопировала их в папку System 32/drivers... Перезагрузила... Но тачскрин так и не заработал... Что я сделала не правильно? Подскажите пожалуйста!

[Дмитрий_Сычёв@vk]

Видимо из за вот этого ";CopyTouchFirmware = 12 ... ;[CopyTouchFirmware] ;SileadTouch.fw". Закоментирована строчка команды копирования файла калибровки.